This mold has one cavity.
Each sphere made with this mold has the following dimensions:
- Diameter: 19 mm (3/4″)
- Height: 18 mm (3/4″)
- Truncation area: approximately 7 mm (1/4″)
This mold has a glossy surface.
Mold can have a slit (cut), this option is chosen in the drop-down menu. A cut makes it easier to take the ready piece out of the mold and can be helpful for placing things inside of the mold (plants, etc). If you doubt if to order the mold with a cut or without, please, take into account that you can always make the cut yourself (contact me for an advice how to cut the mold in the best way).
When you use the mold with a slit just adjust two sides on the cut together before pouring epoxy resin. The better the sides are adjusted, the better the result (smaller seam).
All of my silicone molds are flexible, resistant to tearing, and are durable in use.
Plus, all of my silicone molds can be used with these materials:
- Epoxy resins
- Polymer clay
- Low-temperature melt light metals
All of my silicone molds have a useful temperature range of -53°C to 232°C / -65°F to 450°F.
Please, don’t hesitate to contact me if you have any questions!