Description
This listing is for 10 different crystal molds.
You can buy these crystals separately here however a set is 10% cheaper than 10 separate crystal molds.
Here is the list of 10 shapes and sizes of the crystals in a set.
Shape |
Length
|
Base
|
Length
|
Base
|
| #1 | 55 mm | 16 x 12 mm | 2 1/8″ | 5/8″ x 1/2″ |
| #2 | 55 mm | 17 x 13 mm | 2 1/8″ | 5/8″ x 1/2″ |
| #3 | 46 mm | 14 x 14 mm | 1 7/8″ | 1/2″ x 1/2″ |
| #4 | 47 mm | 23 x 23 mm | 1 7/8″ | 7/8″ x 7/8″ |
| #5 | 56 mm | 18 x 18 mm | 2 1/4″ | 3/4″ x 3/4″ |
| #6 | 50 mm | 16 x 12 mm | 2″ | 5/8″ x 1/2″ |
| #7 | 56 mm | 24 x 14 mm | 2 1/4″ | 1″ x 1/2″ |
| #8 | 53 mm | 18 x 15 mm | 2 1/8″ | 3/4″ x 5/8″ |
| #9 | 55 mm | 22 x 22 mm | 2 1/8″ | 7/8″ x 7/8″ |
| #10 | 57 mm | 17 x 12 mm | 2 1/4″ | 5/8″ x 1/2″ |
You can also choose the position of the crystal in the mold: horizontal (like in the photo) or vertical. Please, note that crystal’s top is sharp; be very careful when you take it out from the vertical mold (not to damage the mold with the sharp edge).
Position |
Description |
| Horizontal | You will be able to take your crystal out of your mold through a large opening along the long side of the mold. The mold in the photos above is horizontal.
Choose horizontal if you want to accurately place lots of items in your crystal. |
| Vertical | You will be able to take your crystal out of your mold through a small opening along the base of the mold. Please note: you will have to be careful when removing your crystal as the sharp point might damage the mold.
This mold is recommended if you need to place items vertically in your crystal. |
The molds have a glossy surface.This means your crystals will be smooth. However, they might have small imperfections because the model is the real stone crystal with natural imperfections.
All of our silicone molds are flexible, resistant to tearing, and are durable in use.
You can use silicone molds with the following materials:
- Resins
- Epoxy resins
- Polymer clay
- Soap
- Wax
- Low-temperature melt light metals
- Plaster
- Gypsum
- Concrete
Useful temperature range for molds: from -53°C to +232°C / from -65°F to +450°F.
Check FAQ for more detailed information (materials to be used with the molds, care instructions, etc).
Please, don’t hesitate to contact us if you have any questions!
Reviews
There are no reviews yet.