Crystal Mold 47-57mm (10 Size Options)

$8.70$9.70

10 size silicone mold set for epoxy resin and polymer clay for making glossy crystal-shaped castings. Suitable for creating pendants, decorations.

Clear

Description

This is one mold for one crystal.

You can choose the crystal type you like (10 possible shapes and sizes).

Shape
Length
[mm]
Base
[mm]
Length
[inches]
Base
[inches]
#1 55 mm 16 x 12 mm 2 1/8″ 5/8″ x 1/2″
#2 55 mm 17 x 13 mm 2 1/8″ 5/8″ x 1/2″
#3 46 mm 14 x 14 mm 1 7/8″ 1/2″ x 1/2″
#4 47 mm 23 x 23 mm 1 7/8″ 7/8″ x 7/8″
#5 56 mm 18 x 18 mm 2 1/4″ 3/4″ x 3/4″
#6 50 mm 16 x 12 mm 2″ 5/8″ x 1/2″
#7 56 mm 24 x 14 mm 2 1/4″ 1″ x 1/2″
#8 53 mm 18 x 15 mm 2 1/8″ 3/4″ x 5/8″
#9 55 mm 22 x 22 mm 2 1/8″ 7/8″ x 7/8″
#10 57 mm 17 x 12 mm 2 1/4″ 5/8″ x 1/2″

You can also choose the position of the crystal in the mold: horizontal (like in the photo) or vertical. Please, note that crystal’s top is sharp; be very careful when you take it out from the vertical mold (not to damage the mold with the sharp edge).

Position
Description
Horizontal You will be able to take your crystal out of your mold through a large opening along the long side of the mold. The mold in the photos above is horizontal.

Choose horizontal if you want to accurately place lots of items in your crystal.

Vertical You will be able to take your crystal out of your mold through a small opening along the base of the mold. Please note: you will have to be careful when removing your crystal as the sharp point might damage the mold.

This mold is recommended if you need to place items vertically in your crystal.

This mold has a glossy surfaceThis means your crystals will be smooth. However, they might have small imperfections because the model is the real stone crystal with natural imperfections.

 

All of our silicone molds are flexible, resistant to tearing, and are durable in use.

You can use silicone molds with the following materials:

  • Resins
  • Epoxy resins
  • Polymer clay
  • Soap
  • Wax
  • Low-temperature melt light metals
  • Plaster
  • Gypsum
  • Concrete

Useful temperature range for molds: from -53°C to +232°C / from -65°F to +450°F.

Check FAQ for more detailed information (materials to be used with the molds, care instructions, etc).

Please, don’t hesitate to contact us if you have any questions!

Additional information

Weight N/A
Dimensions N/A
Material

Shape

Food Safe

Surface

,

Partnumber

Shape #1, Shape #2, Shape #3, Shape #4, Shape #5, Shape #6, Shape #7, Shape #8, Shape #9, Shape #10

Horizontal / Vertical Mold

Horizontal, Vertical

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…