Description

Silicone mold for a crystal. This is one mold for one crystal.

A position of the crystal in the mold: vertical. Please, note that crystal’s top is sharp; be very careful when you take it out from the mold (not to damage the mold with the sharp edges).

There are two possible sizes for a crystal made with this mold. Dimensions:

1st size: Short

• Length: 28-33 mm (1.10″-1.30″)
• The widest part of the crystal: 13.3 mm (0.52″)

2nd size: Long

• Length: 45-50 mm (1.77″-1.97″)
• The widest part of the crystal: 13.6 mm (0.54″)

Surface: glossy.

All of our silicone molds are flexible, resistant to tearing, and are durable in use.

You can use silicone molds with the following materials:

• Resins
• Epoxy resins
• Polymer clay
• Soap
• Wax
• Low-temperature melt light metals
• Plaster
• Gypsum
• Concrete

Useful temperature range for molds: from -53°C to +232°C / from -65°F to +450°F.

We recommend this mold to well-experienced masters because of the following reasons:
A person who is just starting using molds and working with epoxy resin may find the process of taking a crystal out of the mold a bit difficult. You need some experience with such shapes not to damage the mold (for example with the sharp edges of the crystal).
Some experince is also important to make an epoxy crystal itself to avoid bubbles and to place everything you want inside the crystal in the right way.
But we’re more than sure that with a bit of practice and accuracy everyone can use it.

Check FAQ for more detailed information (materials to be used with the molds, care instructions, etc).

Please, don’t hesitate to contact us if you have any questions!