Silicone mold for 8 smooth beads in the form of a ring, with a large hole.
Diameter – 13 mm (8/16″)
Height – 7 mm (4/16″)
Hole diameter – 5 mm (3/16″)
1. Pour the resin into the holes to the top (but do not pour over the edge!). Let dry completely.
2. Pull out finished products. The top edge will have a groove, because. resin shrinks.
3. Put the beads on a flat surface and use a toothpick to “drop” the resin into the groove very carefully. Be careful not to run resin around the edges. When the resin hardens, you will get a very even and neat edge.
I advise you to do this with all products (rings, bracelets) that you make in similar molds open at the top.
All of my silicone molds are flexible, resistant to tearing, and are durable in use.
Plus, all of my silicone molds can be used with these materials:
- Epoxy resins
- Polymer clay
- Low-temperature melt light metals
All of my silicone molds have a useful temperature range of -53°C to 232°C / -65°F to 450°F.
Please don’t hesitate to contact me if you have any questions!